Bilde 1 av 5
Kali Audio SM-5 Active Studio Monitors w/DSP and Calibration
Kan bestilles – leveres senere
- Frakt fra 195 kr · Hentes på vårt hentelager i Bærum gratis
- 14 dagers angrerett – les vilkårene
- Usikker på om den passer? Ring 900 73 461, mandag–fredag 11–18, lørdag etter avtale
- Spørsmål om produktet? Send oss en e-post
Beskrivelse
NB:Pris pr stk.!!
Believe Everything You Hear
Kali Audio’s SM-5 is the best studio monitor we’ve built so far. With unparalled accuracy, imaging, and translation, it presents every detail of your mix with pinpoint precision and fidelity.
The SM-5 features user-editable DSP to process room calibration profiles on board, for a perfect fit in your room.
Kali’s Ultimate Speaker
Kali’s founding principle is to deliver the best possible product for the price. Our speakers have always been praised for their
accuracy, translation, and ease of use. The SM-Series builds on these ideals, and incorporates the best available materials,
components, and manufacturing.
The result is a high performance studio monitor that is ready for the most demanding mixing and mastering applications.
With onboard processing for room calibration, each speaker can be programmed with delays, trims, and EQs to deliver accurate
response in your room.
The SM-5 gives users full control of 8 parametric EQs, delay up to 12ms, and loudspeaker trim. These parameters
can be accessed and edited using our Kali Control Panel application, available for both Mac and Windows.
Importantly, since these parameters are processed by the same DSP hardware already in line, using user-defined DSP
adds no additional latency to the system. Total digital latency is acceptably low to allow tracking using the SM-5s.
Onboard calibration removes the need for a dedicated room calibration processor. It also prevents some of the
confusion and mishap that is possible with a plug-in based processor. Calibration is available for any source you
could plug into the speaker, without needing to route it through software, and it will never be active on a mix you print.
Kali has fully documented our recommended room calibration procedures. When you perform the measurement
yourself, we can provide room tuning files for a small fee per speaker. More information can be found
at Kaliaudio.com/santa-monica-how-to
Software
User-editable DSP is available using Kali Control Panel software, available for both Mac and Windows.
Kali Control Panel works in both Online Mode, meaning that each speaker is connected to a network with an ethernet cable, or
Offline Mode, meaning that you can use a USB thumb drive to load files onto the speaker.
MUCH more information may be found at kaliaudio.com/santa-monica-how-to.
Kali Control Panel is currently in beta, and not all features may work as intended at this time.
Specifications
| Self-Powered: | Yes |
| Amplifer: | Class D |
| Amplifier Power: | 225 W |
| HF Driver: | 1-Inch Metal Alloy Dome Tweeter |
| Midrange Driver: | 4-Inch Optimized Profile Paper Cone |
| LF Driver: | 5-Inch Optimized Profile Paper Woofer |
| LF-to-Midrange Crossover: | 280 Hz |
| Midrange-to-HF Crossover: | 2800 Hz |
| Frequency Response: (-10 dB): | 39 Hz- 25 kHz |
| Frequency Range: (+/-3 dB): | 47 Hz - 21 kHz |
| Recommended Listening Distance: | Up to 4 Meters |
| Max SPL with peak limiter engaged: | 117 dB @ 1m |
| Loudspeaker THD: (85dB SPL at 1M) | <0.75% from 100-450 Hz, <0.5% above 450 Hz |
| Inputs: | Balanced Analog over XLR AES/EBU over BNC RJ45 for Control |
| Ouputs: | AES/EBU over BNC thru |
| Enclosure: | Front Ported |
| Mounting Holes: | Top and bottom, spaced 4.25 x 2 Inches (108 x 50.8 mm) |
| Product Height: | 15.6 Inches (39.6 cm) |
| Product Depth: | 9.8 Inches (24.8 cm) |
| Product Width: | 7.9 Inches (20 cm) |
| Product Weight: | 21 lbs (9.5 kg) |



