Hopp til innhold

Ser du lavere pris et annet sted? Si fra, så justerer vi oss.

Matrix Pro Audio

Bilde 1 av 3

Motu 828(2024)USB3 Audio Interface

MOTU

12 145 krFør 13 995 krinkl. mva9 716 kr eks. mva

Kan bestilles – leveres senere

  • Vipps
  • Visa
  • Mastercard
  • Klarna
  • Frakt fra 195 kr · Hentes på vårt hentelager i Bærum gratis
  • 14 dagers angrerett – les vilkårene
  • Usikker på om den passer? Ring 900 73 461, mandag–fredag 11–18, lørdag etter avtale
  • Spørsmål om produktet? Send oss en e-post

Beskrivelse

Motu 828

Femte generasjon anno 2024 høykvalitets lydkort spekket med med nyttige funksjoner

28 x 32 USB3 audlydkort for Mac, Windows og iOS med DSP mikser og direkte monitoring effekter.

Audio Performance
Superb analog audio quality
Renowned ESS Sabre32™ DAC technology delivers 125 dB dynamic range and extremely low harmonic distortion. Analog performance is driven by decades of engineering expertise in audio interface technology.

USB-C
Universal connectivity for Mac, PC and iOS
Connect to your Mac, PC or iOS device with 5 Gbps USB 3 (compatible with USB 2), with up to 60 audio channels (28 in and 32 out). Class-compliant firmware means you can plug-and-play with Mac or iOS hosts, no driver needed. Industry standard high-performance drivers work with any audio apps. Connect directly to your iPad™ via USB-C or a standard camera connection kit (Lightning adapter).

Connectivity
Connect all your studio gear, including microphones, guitars, synths, keyboards, drum machines, outboard processors, MIDI gear, optical expanders — even a foot pedal. All 28 inputs and 32 outputs are available simultaneously.

High Performance Driver
Ultra-low latency performance
Optimized drivers for both Mac and PC deliver renowned, ultra-low latency performance. With a high-performance DAW such as Digital Performer, the 828 delivers an astonishing round trip latency (RTL) of ~2 ms (milliseconds) over USB (2 or 3) at 96 kHz with a 32-sample host buffer.

Mic Inputs
Transparent mic channels and hi-Z guitar inputs
Capture your recorded material in its truest, most natural form with -113 dB THD+N, 115 dB dynamic range and -129 dBu EIN performance. Each mic channel has individual preamp gain, pad, 48V phantom power and remote control from your computer or iOS device. Each combo jack alternately provides a 1/4-inch high-impedance TS guitar input for DI tracking and reamping.

Hi-Z Guitar Inputs
DIY guitar re-amping
DI your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic’d up amp simultaneously. Then re-amp the dry signal later with different amps and cabs — or amp modeling plug-ins — to experiment with different tones. No need to re-plug cables between recording and re-amping.

Channel 1-2 Sends/Returns
Extra line inputs when you need them
Do you work with compressors and other outboard gear? Each 828 mic input offers a dedicated analog send/return loop, allowing for both mono or stereo mic channel outboard processing. If nothing is plugged in to a mic input, its return serves as an extra line input with identical signal characteristics to all other line inputs.

Monitor Group
Control up to ten analog outputs
Control your 5.1 or 7.1 surround speaker system with a single fader. The Monitor Group gives you the flexibility to choose any analog outputs you wish to control.

Control Room
A/B speaker select and talkback
Take control of your recording sessions with the front-panel talkback switch. Connect two sets of monitors and check your mixes instantly with front-panel A/B select buttons.

CueMix™ 5
Monitor Mixing with Effects
CueMix 5 for Mac, Windows and iOS gives you simple, yet comprehensive graphic control over your mix with attractive graphic mixing, graphic editing of parametric EQ, and a convenient touch-friendly interface (on iOS) for quick access to all mixing features, digitally controlled trims and other settings.

Wireless Control
CueMix 5 for iOS
Control all settings and mixing from your USB host or from an iPhone or iPad running the CueMix 5 app. You can even use multiple iOS devices simultaneously. Set a password for your 828 for network security.

ADVANCED EXTRAS

Loopback and live streaming
With 828 loopback channels, you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the 828 in your host software for live streaming or podcasting.

Optical I/O and optical expansion
Two optical banks provide 16 channels of ADAT optical at 48 kHz, 8 channels of S/MUX optical I/O at 96 kHz, with optional stereo TOSLink at rates up to 96kHz. Expand your 828 with other gear, or use it as an optical expander.

S/PDIF digital I/O
The 828's standard RCA S/PDIF input and output make stereo digital transfers a snap, with optional external clocking and support for sample rates up to 96 kHz. Choose any source signal for the S/PDIF output.

MIDI I/O with MIDI Thru
Connect MIDI gear without the need for a separate MIDI interface. MIDI Thru mode lets you loop MIDI directly from IN to OUT, bypassing the computer (or with no computer connected).

Foot switch input
Connect a standard foot pedal switch (sold separately) for hands-free punch-in while recording. Or map the pedal to any keystroke function in your host software.

DC-coupled TRS outputs
All analog outputs are DC-coupled. This means you can use the 828 to manipulate and sequence modular synthesizers from a host DAW using control voltage (CV).

Two headphone outputs
Each headphone output can be programmed with the same or different mixes, with independent volume control from the front-panel or CueMix 5.

Balanced analog
The 828's balanced I/O connections are well-protected against RF interference, AC hum, and other noise-producing environmental factors.

Meter Views
Not using the optical I/O? Or any digital I/O? The 828 provides customized meter views for analog I/O only, digital I/O only and other combinations to best support your workflow.

Performer Lite

Start making music right away with included workstation software, virtual instruments and loops
Connect the 828 to your Mac or PC and start laying down tracks with the included Performer Lite production software, plus hundreds of loops, one-shots and sounds from industry leaders Big Fish Audio, Lucidsamples and Loopmasters. Performer Lite provides everything you need to record, edit, mix, process and master your own music tracks quickly and easily. Plug in your mic, guitar and MIDI keyboard and start tracking with over 100 virtual instruments, dozens of effects plug-ins, guitar FX processing and much more.

100+ Instruments + 6 GB of free loops and sample packs
Performer Lite includes over 100 virtual instruments, including acoustic and electric pianos, guitars, basses, drums, organs synths, orchestral instruments, choirs, world instruments and much more. Take your musical muse wherever it wants to go.

Technical Specifications

Sample rates

44.1, 48, 88.2, 96, 176.4, 192 kHz

Mic/line/instr inputs

2 x XLR/TRS "combo" jacks

Individual -20 dB pad and 48V phantom power

Preamp gain: +74 dB in 1 dB increments

1 MO impedance on the line/instr inputs

Analog inputs

8 x 1/4-inch TRS line in (balanced/unbalanced)

2 x 1/4-inch insert returns function as TRS line inputs (with no mic inputs connected)

Max level: +21 dBu

+20 dB digital gain on each input

Analog outputs

8 x 1/4-inch TRS line out (balanced, DC coupled)

2 x male XLR out

Max level: +21 dBu

2 x 1/4-inch TRS stereo headphone (see below)

2 x 1/4-inch TRS sends (pre-converter)

Digital I/O

2 banks (16 ch) of ADAT optical I/O at 1x sample rates

2 banks (8 ch) of S/MUX optical I/O at 2x sample rates

Bank A switchable to stereo TOSLink I/O (optical S/PDIF)

1 x stereo S/PDIF I/O on RCA (up to 96 kHz)

Computer I/O

1 x USB-C 3.1 / USB2 • audio class compliant

1 x IF-certified USB 3.2 Gen1 Type C-to-C cable included

Compatible with USB Type A (with C-to-A cable)

Total USB audio channels: see "Total Audio I/O" below

Round Trip Latency (RTL): ~2 ms (32 sample buffer at 96K)

Total audio I/O

28 in / 32 out (60 total channels) at 1x sample rates

20 in / 24 out (44 total channels) at 2x sample rates

10 in / 14 out (24 total channels) at 4x sample rates

MIDI I/O

1 x MIDI In

1 x MIDI Out/Thru

16 MIDI channels to/from computer host

Headphone

2 x 1/4-inch TRS stereo headphones

Output impedance: <1O

Max output: 14.4 dBu

Phantom power

2 x individual +48V

Foot Switch

1 x 1/4-inch foot switch input

Mapping: pedal up/down to any host keystrokes

Sync I/O

1 x BNC Word Clock In

1 x BNC Word Clock Out/Thru

Sample rates: all (from 44.1 to 192 kHz)

Front panel

2 x XLR/TRS combo inputs

2 x 1/4" TRS headphone outputs

2 x potentiometer • headphone volu

Se alle 8