Hopp til innhold

Ser du lavere pris et annet sted? Si fra, så justerer vi oss.

Matrix Pro Audio

Bilde 1 av 3

PMC6-2 Single monitor(Right)

PMC Speakers

54 990 krFør 70 000 krinkl. mva43 992 kr eks. mva

1 på lager

  • Vipps
  • Visa
  • Mastercard
  • Klarna
  • Frakt fra 195 kr · Hentes på vårt hentelager i Bærum gratis
  • 14 dagers angrerett – les vilkårene
  • Usikker på om den passer? Ring 900 73 461, mandag–fredag 11–18, lørdag etter avtale
  • Spørsmål om produktet? Send oss en e-post

Beskrivelse

Kontakt oss for tilbud!

NB:Egen fraktmetode må avtales for disse!

https://www.soundonsound.com/reviews/pmc6-2

PMC 6-2

A serious near/midfield monitoring tool that fits easily within any control room or immersive system, the PMC6-2 is unmatched in its outstanding clarity, forensic resolution, and sheer impact.

The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.

This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.

The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.

A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.

  • Active 3-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 33Hz - 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 109dB @1m (Half space value calculated as +3dB from full space measurement.
    Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom
  • Ceiling-mount yoke allows suspension in multi-channel or immersive systems

TypeActive 3-way nearfield reference monitor with ATL™ bass loading Drive Unit Complement

LF 2 x PMC 150mm (6”) studio 6 drivers

MF PMC 55mm (2”) soft dome mid-range

HF PMC 27mm (1”) soft dome tweeter

Effective ATL™ Length2m (6.6ft)

Frequency Response 33Hz - 25kHz (- 3dB) (@1m full space, on-axis)

Sensitivity+4dBu input signal = 98dB SPL @ 1m Max continuous SPL109dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Max Peak SPL121dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

DirectivityH +/-50 degrees V +60/-40 degrees (-6dB off axis @10kHz)

InputXLR switchable between analogue & digital AES3 Analogue input- +20/+24dBu max. input level (selectable) - 22K ohm input impedance Digital input- 16/24-bit AES3 signal, left, right or left + right - 18 - 192kHz Sample Rate - 110 ohm input impedance

Expansion card slot- For future connectivity upgrades OutputXLR digital AES3 (fixed 24-bit @ 96kHz) NetworkRJ45 for use with PMC SoundAlign web interface FeaturesLevel Trim (+/-10dB) High-pass filter (20 - 200Hz, 12dB/Oct) Delay (0 - 30mS) Phase (normal or inverted) LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707) Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB) User presets (3 + factory defaults) Latency2.4mS

Amplifier power per channel

LF 2 x 400Wrms

MF 1 x 400Wrms

HF 1 x 400Wrms

Mains100 - 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle)50W Power consumption (max)1500W

Cabinet dimensionsH 400mm (15.7”) W 430mm (16.9”) D 372mm (14.6”)

Weight21.3kg (47lbs) each

Available Finishes: Studio black

polar graphspolar graphs


https://pmc-speakers.com/studio/pmc-6-2

Se alle 20