Hopp til innhold

Ser du lavere pris et annet sted? Si fra, så justerer vi oss.

Matrix Pro Audio

Bilde 1 av 3

Prism Sound Lyra 2 Reference Grade Audio Interface w/2 Mic Pre

Prism Sound

25 000 krFør 32 500 krinkl. mva20 000 kr eks. mva

1 på lager

  • Vipps
  • Visa
  • Mastercard
  • Klarna
  • Frakt fra 195 kr · Hentes på vårt hentelager i Bærum gratis
  • 14 dagers angrerett – les vilkårene
  • Usikker på om den passer? Ring 900 73 461, mandag–fredag 11–18, lørdag etter avtale
  • Spørsmål om produktet? Send oss en e-post

Beskrivelse

LYRA 2

REFERENCE GRADE COMPACT AUDIO INTERFACE

Lyra represents the pinnacle of compact audio interfaces. Packing Prism Sounds trusted, uncompromising AD/DA conversion into a compact chassis perfect for use in the studio or on the road.

Based on the Orpheus’ audio path and clock circuitry, Lyra is ideal for those who don’t require a large I/O count, but do demand the highest quality and most transparent AD/DA available.

RENOWNED AD/DA CONVERSION

Lyra cuts no corners in its design and boasts the same trusted Prism Sound convertors used on countless hit records. It’s ultra-transparent characteristic means what you put into the Lyra is exactly what you get out of it.

PRISTINE PRE-AMPLIFICATION

Featuring two class-A microphone preamps, Lyra 2 guarantees superbly clean, detailed recordings that capture a performance the way it was intended.

SOFT-CLIP LIMITING (OVERKILLER)

Lyra's analogue input channels include a switchable Prism Sound 'Overkiller' circuit. This soft-clip limiter gently absorbs transients and allows signal levels to be pushed to their limits without risk.

QUALITY SUPPORT

Prism Sound's reputation for audio excellence has been matched only by its top quality after-sales support and technical advice. The longevity of a Prism Sound product is a testament to the dedicated team behind it.

2 A/D Analogue Input Channels

4 D/A Analogue Line Output Channels

S/PDIF / ADAT Digital In/Out

ADAT (8 channel): 44k1, 48k
ADAT SMUX (4 channel): 88k2, 96k

AES3 Mode on RCA/Phono

Word-clock Sync I/O

RIAA de-emphasis filter to allow direct connection of a vinyl deck

Formats supported: Lyra 2S/PDIF (RCA or TOSLINK), ADAT, ADAT S/MUX (TOSLINK), AES3 (XLR via supplied adapter cable)
Sample rates supported44.1, 48, 88.2, 96, 176.4 and 192kHz
Sample rates supported: ADAT
(Lyra 2 only)
ADAT (8 channel): 44k1, 48k
ADAT SMUX (4 channel): 88k2, 96k
Channel Status:Ignored
Word-length24 bit
AES3 Operation (Lyra 2)Via S/PDIF RCA, using XLR-RCA adapter (supplied)
Sample-rate converter (SRC)Selectable at S/PDIF input; allowing input at any sample rate
Bit transparencyMaintained (allows recording of Dolby or DTS streams)

Formats supportedS/PDIF (RCA or TOSLINK), ADAT, ADAT S/MUX (TOSLINK), AES3 (RCA)Sample rates: S/PDIF/AES344.1, 48, 88.2, 96, 176.4 and 192kHzSample rates: ADAT
(Lyra 2 only)ADAT (8 channel): 44k1, 48k; ADAT S/MUX (4 channel): 88k2, 96kChannel StatusFull implementation, Consumer (S/PDIF) or professional (AES3)Word-length24 bit, or reduction to 16 bits using flat TPDF dither or Prism Sound SNS (Super Noise Shaping – four alternative shapes available)AES3 (AES/EBU) operation
(Lyra 2 only)via S/PDIF RCA, using RCA-XLR adaptor (supplied) and AES3 mode (2V p-p, 110Ω and AES3 channel status)Sample-rate converter (SRC)
(Lyra 2 only)Selectable at S/PDIF output; output rate can be referenced to Wordclock, DI or local clock at 44.1, 48, 88.2, 96, 176.4 or 192kHzBit transparencyMaintained in 24 bit mode (allows playback of Dolby or DTS streams to external decoder)


https://beta.prismsound.com/products/lyra2/

Se alle 201